Product Overview
The MS-505 is a high-speed automatic PP strapping machine built around a fixed arch and waist-height worktable. It is intended for repeat strapping of cartons, bundles and other packages that fit the selected arch and can be placed stably on the table. A touch-screen interface, front foot bar and continuous operating mode give operators several ways to initiate a cycle according to the packing workflow.
This machine should be selected from the package outward. Package dimensions determine the arch, while package weight, surface condition and transport requirement affect strap width, tension and the number of straps. The headline cycle rate is useful for comparison, but a realistic production target should include package presentation and operator or conveyor handling time.
MAVORIX supports overseas buyers with China-side supplier comparison, technical clarification, inspection coordination, warehouse intake and export packing. MAVORIX is the sourcing and coordination partner, not the stated manufacturer of the MS-505.
Documented Specifications
| Model | MS-505 |
|---|---|
| Machine Type | High-speed automatic arch strapping machine |
| Power Supply | 220V, 50/60Hz, single phase, 0.6kW, 4A |
| Documented Strapping Speed | Up to 65 straps per minute |
| Tension Range | 0-45kg |
| Sealing Position | Bottom hot-sealing position |
| Table Height | 850mm |
| Standard Arch Opening | 650mm W x 500mm H inner size; customized arch subject to confirmation |
| Standard PP Strap | 5mm or 6mm wide, 0.5-0.8mm thick; specify before ordering |
| Optional Strap Width | 8mm, 9mm, 11mm or 12mm; configuration must be specified |
| Strap Spool | 200-210mm inner diameter, 400-450mm outer diameter, 170-190mm width |
| Operating Modes | Manual/parallel, continuous and foot-switch operation |
| Control | PCB microchip circuit board and touch-screen interface |
| Motor | MEIWA brushless DC motor stated in supplied document |
| Sensor | P+F or FOTECK stated in supplied document |
| Machine Dimensions | 1170 x 585 x 1450mm |
| Shipping Dimensions | 1220 x 650 x 1600mm |
| Net / Gross Weight | 185kg / 230kg |
| Documented Noise Level | Up to 75dB |
| Operating Environment | 0-40 degrees C; humidity up to 98% |
| Documented Joint Standard | Adhesion surface at least 90%, width at least 20%, position deviation up to 2mm |
Values above are taken from the supplied MS-505 document. Final electrical configuration, arch, strap, accessories, compliance documents and acceptance criteria must be confirmed in the quotation and purchase order.
Key Machine Features
- Touch-screen operating interface
- Hinged top plates for service access
- Front foot-bar cycle switch
- Automatic strap ejector
- DC brushless motor
- Waist-high automatic strap feeding
- PCB microchip circuit-board control
- Adjustable strap tension and sealing settings
Typical Applications
- Carton and corrugated-box strapping
- Printed products and book bundles
- Light, stable industrial packages
- Warehouse and logistics packing stations
- Manufacturing-line end-of-line packing
- Repeat PP-strapping operations with a fixed arch
These are typical application categories, not a universal suitability claim. Very soft, unstable, heavy, wet or irregular packages may need trials, pressing devices, conveyors or a different machine format.
How to Select the Right Automatic Strapping Machine
Start with the largest and smallest packages, not only the average carton. Allow clearance inside the arch and confirm that the package can be supported and positioned consistently. Then define the strap material, required holding force, strap position and acceptable joint appearance.
Production rate should be expressed as packages per minute together with straps per package. A machine capable of 65 cycles per minute cannot deliver the same number of finished packages if each carton needs two straps or if an operator must rotate and reposition it. For line integration, describe the upstream conveyor, package spacing, signal logic, roller height and downstream flow.
Electrical connection, guarding, emergency-stop arrangement and destination-market conformity documents also need to be agreed before ordering. For Romania or another EU destination, the buyer should state the required documentation and site connection rather than relying on a generic 220V description.
Information Required for a Quotation
- Minimum and maximum package dimensions
- Package weight, material and surface condition
- Required straps per package and strap position
- Target packages or straps per minute
- PP strap width, thickness and spool specification
- Required tension range and joint acceptance standard
- Required arch opening
- Operator-fed, foot-switch or continuous workflow
- Conveyor and photo-eye integration requirement
- Site voltage, frequency, phase and connection
- Interface and manual language
- Destination-market safety and conformity documents
- Spare-parts and consumables requirement
- Destination, unloading method and packing requirement
MAVORIX Sourcing Support
MAVORIX helps overseas buyers source packaging machinery in China without presenting itself as the machine manufacturer. Related requirements can be handled through our packaging industry sourcing, quality inspection, export support and industrial sourcing workflows.
- Translate the package and production requirement into a supplier RFQ
- Compare machine configuration, arch size, strap and electrical scope
- Coordinate technical questions with China-side suppliers
- Collect production and machine-test photos against an agreed checklist
- Follow sample-package testing when the buyer supplies representative packs
- Check manuals, accessories and spare parts against the packing list
- Coordinate warehouse intake and wooden-case export packing
- Consolidate the machine with other packaging equipment or spare parts where practical